Installing The Cooker Hood; Installation Requirements - Zanussi CH 6029 GR Instruction Booklet

Please ensure that when the appliance is
installed it is easily accessible to an
engineer in the event of a breakdown.
All installations must comply with the
local authorities requirements for the
discharge of exhaust air.
Incorrect installation may affect the
safety of this cooker hood.

Installation Requirements

Before fitting the hood beneath any type
of canopy or wall cabinet, ensure that
the housing is firmly fixed to the wall in
accordance with the manufacturer's
instructions.
If it is necessary to fix the housing for the
canopy to a hollow construction plaster or
partition board structure then it should be
sufficiently reinforced to be quite rigid in the
area of the cabinet housing fixings.
Ducting
The ducting must be fire retardant 125mm (5 ins)
in diameter and the length should be no
more than:
3 metres with one 90
2 metres with two 90
Bends of more than 90
efficiency of the hood and reduce the airflow.
Clearance Height
The cooker hood is designed to be fitted over
a cooking appliance at the clearance heights
stated, providing the maximum output of the
appliance beneath does not exceed the
maximums quoted in the Technical Specifications.
If the output of the appliance below the
cooker hood exceeds the maximum outputs
quoted in the Technical Information, please
refer to the cooker appliance manufacturer's
installation instructions.

INSTALLING THE COOKER HOOD

0 bend
0 bends
will reduce the
0
11