Installing The Cooker Hood; Installation Requirements - Zanussi ZHT610X UK User Manual

Please ensure that when the appliance is installed it
is easily accessible to an engineer in the event of a
breakdown.
All installations must comply with the local
authorities requirements for the discharge of
exhaust air.
Incorrect installation may affect the safety of this
cooker hood.

Installation Requirements

Before installation check the wall to which the
cooker hood is to be fitted for electric cables,
water pipes or gas.
If it is necessary to fix the hood to a hollow construction
plaster or partition board structure then it should be suffi-
ciently reinforced to be quite rigid in the area of the cooker
hood mounting brackets, and the appropriate rawl plugs
used for this type of fixing (not supplied).
Ducting
The ducting must be fire retardant 100mm (4ins) in dia-
meter and the length should be no more than:
• 3 metres with one 90° bend
• 2 metres with two 90° bends
Bends of more than 90° will reduce the
efficiency of the hood and reduce the airflow.

INSTALLING THE COOKER HOOD

11