Installation Instructions; Electrical Connections - Zanussi CH 6029 GR Instruction Booklet

It is dangerous to alter the specifications or attempt to modify this product in any way.
Technical Information
DIMENSIONS
WEIGHT
ELECTRICAL SUPPLY:
POWER CONSUMPTION:
FAN MOTOR:
LAMP:
SUITABLE FOR INSTALLATION
ABOVE:
Note: CE Marking certifies that this appliance complies with the require-
ments laid down in EEC directive 89:336. (Electromagnetic compatibility)
and subsequent modifications and Low Voltage directive 72/23/E.
WARNING: DOUBLE
INSULATED-DO NOT EARTH
Electrical Requirements
Any permanent electrical installation must
comply with the latest I.E.E. Regulations and
local Electricity Board regulations. For your own
safety this should be undertaken by a qualified
electrician e.g. your local Electricity Board, or a
contractor who is on the roll of the National
Inspection Council for Electrical Installation
Contracting (NICEIC).
Electrical Connection
Before connecting to the mains supply ensure
that the mains voltage corresponds to the voltage
on the rating plate inside the cooker hood.

INSTALLATION INSTRUCTIONS

HEIGHT:
WIDTH
DEPTH
DUCTING OUTLET:
GROSS:
NET:
Voltage (50Hz)
ELECTRIC HOB:
GAS HOB:
SLOT-IN GAS COOKER:
SLOT-IN ELECTRIC COOKER:

ELECTRICAL CONNECTIONS

This appliance is fitted with a 2 core mains
cable and must be permanently connected to
the electricity supply via a double-pole switch
having 3mm minimum contact gap on each
pole. A Switched Fuse Connection Unit to
BS1363 Part 4, fitted with a 3 Amp fuse, is a
recommended mains supply connection
accessory to ensure compliance with the Safety
Requirements applicable to fixed wiring
instructions.
This appliance conforms to BS 800: 1988 and
EEC Directive No. 78 308 regarding
suppression of radio and television
interference.
10
20.00cm
52.20cm
28.50cm
120mm
4.8kg
5.8kg
220-240 V
175 W
95W
80W
7KW (max)
10KW (max)
13.5KW (max)
12.4KW (max)