Heating System On Board - BENETEAU Sunsail F40 Training Manual

Sunsail Training Manual F40 Version 1
The heating system on board
Main switch ON/OFF- press the main switch ON/OFF and the heater is activated, this will
illuminate and the indicator "ON/Status" lights to confirm the heater operation. After turning off
and the heater has cooled, the status indicator switches off.
Eco – Energy saving mode. The heating is switched to electricity/fuel saving operation. This is
an environmentally friendly mode.
Normal – Comfort heating. The heater runs at maximum nominal power. Air is heated to
the desired temperature. Select this mode for fast warming of the interior or to maintain a
moderate temp level.
Plus – Fast heating. This temporarily runs at an increased power, with the time for this mode
limited.
Fan– Ventilation. This mode provides a flow of fresh air and can be used to cool the interior
Altitude – Altitude correction. Only used when over 1200m above sea level.
During an operational fault a flashing code is displayed by the status indicator. This function
will enable a diagnosis to be made. Please call the Technical Support Team for advice.
© Sunsail 2011 YACHT FAMILIARISATION pg. 22