Advertisement
CLEANING AND STORAGE
Keep the product clean. Remove debris from it after each use
and before storage. Do not use chemical, alkaline, abrasive or
other aggressive detergents or disinfectants to clean this product
as they might be harmful to its surfaces. Regular and proper
cleaning will help ensure safe use and prolong the life of the
product. Clean the product with a dry cloth. Use a brush for areas
that are hard to reach.
Always store the product in a place that is inaccessible to
children. We recommend using the original package for storage
or covering the product with a suitable cloth or enclosure to
protect it against dust.
MAINTENANCE AND REPAIR
Before and after each use, check the product and accessories (or
attachments) for wear and damage.
Inspecting the drill bits; Since use of a dull tool will cause motor
malfunctioning and degraded efficiency, replace the drill bits
with a new one or re-sharpen when abrasion is noted.
This product does not contain any parts that can be repaired
by the consumer. Contact an authorised service centre or a
similarly qualified person to have it checked and repaired.
WARNING!
product from the power supply and let the product cool down
before performing inspection, maintenance and cleaning work! Only
perform repairs and maintenance work according to these
instructions! All further works must be performed by a qualified
specialist!
Always switch the product OFF, disconnect the
16
IBL ED 10-30|06-91
Advertisement
