Advertisement
FORWARD / REVERSE ROTATION CONTROL
Change the rotational direction from forward to reverse by turning
the forward/reverse rotation lever (4).
Position
- 1 -
- 2 -
1. Move the forward/reverse rotation control lever to the left (as
seen from the operator position) in order to use the product in a
clockwise rotational mode.
2. Move the control lever to the right (as seen from the operator
position) in order to use the product in anticlockwise rotational
mode.
WARNING!
is switched OFF and has come to a complete stop! Always ensure that
the forward/reverse rotation lever is adjusted to the correct position
depending on the intended operation! Always slide the
forward/reverse rotation control as far as it will go! Do not use the
product with the control lever in any other intermediate position!
Rotational
Application
direction
Drilling into material
Loosen drill bits
Only change the rotational direction when the product
13
4
IBL ED 10-30|06-91
Advertisement
