TC Electronic G-MAJOR 2 User Manual page 29

GETTING STARTED
How to match the speed of a Rhythmic
Tremolo or Vibrato to a MIDI sequence
• Connect the MIDI OUT jack of your
sequencer (or another device sending out the
MIDI Clock you wish to use as a tempo
reference for G-Major 2) to the MIDI IN jack
of G-Major 2.
• Press the MIDI key to enter the MIDI menu.
Use the UP/DOWN keys to select the MIDI
Clock parameter.
• Set MIDI Clock to "On".
G-Major 2 will now use the incoming MIDI clock
tempo as its Global Tempo. Subdivisions can
be set using the Tempo parameter in each
tempo-aware block/algorithm.
How to switch preamp channels using the
SWITCH OUT jack of G-Major 2 and a MIDI
board sending MIDI CCs
• Connect the SWITCH OUT jack on G-Major
2 to your preamp's/combo's channel
switching jacks.
• Press MOD and select Relay 1 or 2 using the
UP/DOWN keys.
• Select Learn and press ENTER to activate
the Learn function.
• Press a MIDI CC switch on your MIDI board.
This MIDI CC switch will now switch
channels on your amp.
Repeat the steps above for Relay 2 if you have
more than two channels to switch between.
28