Port And Button Description - TP-Link RE550 User Manual

Chapter 1
You can check the extender's working status by following the LED Explanation table.
Name
(Signal)
2.4GHz
5GHz
POWER
1. 2. 2.

Port and Button Description

Ports or Buttons
WPS Button
Status
The extender is connected to your router's wireless network
Solid blue
and is in a suitable location.
The extender is experiencing poor signal strength. Try
Solid red
relocating it closer to your router.
Blinking WPS connection is in progress.
Off No wireless connection is established.
The extender is connected or not connected to the 2.4GHz
On/Off
wireless network of your host router.
The extender is connected or not connected to the 5GHz
On/Off
wireless network of your host router.
On/Off The extender is on or off.
Blinking The extender is starting up or firmware is being upgraded.
Press the WPS button on your host router, and immediately press the
button on the extender for 1 second. The Signal LED
should change to solid on, indicating successful WPS connection.
Get to Know About Your Extender
Indication
Description
of the extender
4