Set High Speed Mode - TP-Link RE550 User Manual

Chapter 5
2. Go to Settings > Network
1. Select On to enable the DHCP Server of the extender.
2. Enter the starting and ending IP addresses in the
3. Enter other parameters if the ISP offers. The Default Gateway is automatically filled in
and is the same as the LAN IP address of the router.
4. Click SAVE.
5. 5.

Set High Speed Mode

The High Speed feature switches off one of the wireless bands to leave one high-
performance, super-fast network, ideal for HD streaming and gaming applications.
If most of your devices are connected to one wireless band, this feature can increase
the overall performance of your wireless network.
Note:
Before enabling this feature, please go to
bands are both enabled. Additionally, if you are going to disable the 2.4GHz network, it's recommended to first make sure
all your wireless devices support 5GHz network connection.
1. Visit http://tplinkrepeater.net
for the extender.
2. Go to Settings > Advanced Settings
3. Select a high speed mode as needed.
• Select the Auto
network will work on based on its wireless connection to your host router. The
other band will be disabled.
> DHCP Server.
Settings > Wireless >
and log in with your TP-Link ID or the password you set
> High
mode. The extender will decide which band the high-speed
Customize Your Network
IP Address Pool.
Extended Network and check that the 2.4GHz and 5GHz
Speed.
32