Digitus DN-13023 Quick Installation Manual page 5

TCP/IP Setting
5. Set up wireless configuration (only for wireless model):
- Set SSID, Channel, and Security according to the table below
SSID
Channel
Security Settings
Install the Driver of the USB Device
Some USB devices, like printers or MFPs (multifunction printers), require to install
vendor-supplied driver (usually on CDROM). For those USB devices that do not need
to install driver, please skip to next step.
A. Insert the CDROM into the CD drive and run the "autorun" program.
B. Follow the instructions of the installation program to install driver.
C. When the installation program asks you to plug-in the USB device, run the
"Control Center".
D. In the Control Center, click the USB device server that has the desired USB device
attached.
E. Click the desired USB device as Fig 4.
F. Click the "Connect" button. Then the message "Manually Connect by
your_computer_name" will be shown, as Fig 5.
Must match the Access Point.
Access Point sets the Channel used.
Wireless stations automatically locate
the correct channel.
Must match the Access Point.
Figure 4 Click the Desired USB Device
5
Infrastructure Mode