Roland V-60HD Manual

Using smart tally

Hide thumbs Also See for V-60HD:

Using Smart Tally

About Smart Tally

Roland's unique and proprietary wireless tally system uses a wireless LAN router connected

to the V-60HD to send tally information to iOS or Android devices on the network.

* Smart Tally is supported in V-60HD program version 1.1 and later.

You must update the following two programs to the latest version before using this.

5 System program

5 NPU program

Version 1.1 and later

LAN

Wi-Fi

CAM 1

CAM 2

CAM 3

Table of Contents

Do you have a question about the V-60HD and is the answer not in the manual?

Page 1 Using Smart Tally About Smart Tally Roland’s unique and proprietary wireless tally system uses a wireless LAN router connected to the V-60HD to send tally information to iOS or Android devices on the network. CAM 1 Wi-Fi CAM 2 CAM 3 * Smart Tally is supported in V-60HD program version 1.1 and later.
Page 2 You’ll switch to the screen that shows the tally indication. The tally indication is displayed according to the video source that’s selected on the V-60HD. The number in the center of the screen is the channel number. When “STATUS” indicates “Connected,” the connection settings are complete.
Page 3 MEMO If the camera that reads the QR code is too close to the display of the V-60HD, the QR code might not be recognized. If so, move the camera away from the display of the V-60HD, and try again.