mundoclima MUPR-H10X Installation And Owner's Manual page 106

1
3
FAN Mode
1. Press the MODE button to select FAN mode.
2. Press FAN button to select the fan speed
in a range of AU-100%.
Press the ON/OFF button to start the unit.
3.
NOTE: You can't set temperature in FAN mode.
As a result, your remote control's LCD screen
will not display temperature.
1
4
2
3
DRY Mode (dehumidifying)
1. Press the MODE button to select AUTO.
2. Set your desired temperature using the TEMP
or TEMP
3. Press the ON/OFF button to start the unit.
NOTE: FAN SPEED cannot be changed in DRY
mode.
2
HEAT Mode
1. Press the MODE button to select HEAT
mode.
2.
Set your desired temperature using the
TEMP
3. Press FAN button to select the fan speed
in a range of AU-100%.
4. Press the ON/OFF button to start the unit.
NOTE: As outdoor temperature drops, the
performance of your unit's HEAT function may
be affected. In such instances, we recommend
using this air conditioner in conjunction with
other heating appliances.
106
button.
1
3
2
or TEMP button.