Advertisement
B.
Chassis Cleaning
1.1
Dry Cleaner
(FOCD-DC125)
1.2
2.
FOCD-DW
Find more details of opticalCON
on www.neutrik.com.
NEUTRIK AG
LI
NEUTRIK USA Inc.
USA
(
)
NEUTRIK UK Ltd.
UK
NEUTRIK
Vertriebs GmbH
DE / NL / AT/DK
I
Draft. Nr.: BDA 522 V2
Update: 2020-09-07
www.neutrik.com
FOCD-CF
T: +423 / 237 24 24
F: +423 / 232 53 93
T: +1 704 / 972 3050
F: +1 704 / 438 9202
T: +44 1983 / 811 441
F: +44 1983 / 811 439
T: +49 8131 / 280 890
F: +49 8131 / 280 830
Data subject to change without prior notice.
opticalCON QUAD
®
Ÿ
Tools:
Dry Cleaner 1.25 mm (FOCD-DC125)
Ÿ
99% isopropyl alcohol (IPA) or
cleaning fluid (FOCD-CF)
Ÿ
Lint free wipes (FOCD-DW)
Ÿ
Video probe (CAS-FOCD)
1.
Dry cleaning using FOCD-DC125
1.1
Remove Dust cap. Insert the stick of the cleaning
device.
Make sure that the insertion position is on the
1.2
bottom of the LC connector hole in order to hit the
sealing shutter release bar.
Push the outer shell to start cleaning the LC
1.3
connector end face.
A "pop" sound indicates end of cleaning process.
1.4
Remove the cleaning device and put dust cap over
the stick.
Wet cleaning using lint-free wipes
2.
Inspect the LC connectors with a video probe
2.1
tool.
Fold a lint free wipe into a square with one drop of
2.2
cleaning fluid. Be sure that a portion of the wipe
remains dry.
Wipe slightly the ferrule tip in the cleaning fluid
2.3
moistened portion of the wipe. Immediately repeat
this wiping action on the dry section of the wipe to
remove any residual alcohol.
Dispose the wipe. NEVER REUSE A WIPE.
2.4
Inspect the connector again with a video probe tool.
2.5
Repeat the process if necessary.
2.6
NEUTRIK France
NEUTRIK Tokyo Ltd.
NEUTRIK
Hong Kong Ltd.
NEUTRIK India Pvt. Ltd.
©
2020 NEUTRIK . NEUTRIK are registered trademark of Neutrik AG. ALL RIGHTS RESERVED.
®
®
- 5 -
I
HANDLING INSTRUCTION
FR
T: +33 1 / 4131 6750
F: +33 1 / 4131 0511
JP
T: +81 3 / 3663 4733
F: +81 3 / 3663 4796
HK
T: +852 / 2687 6055
F: +852 / 2687 6052
IND
T: +91 / 982 05 43 424
F: +91 / 22 26163 540
R
Advertisement
