Do not stare into beams or view directly with optical instruments. Remove dust cap from the connector (A) and mount NEUTRIK FOCD-STQ inspection tool on it until it is locked (B). Service tool (FOCD-STQ) Prepare the optical fiber video probe with the LC tip correlate tip (C).
Page 3
QUAD ® HANDLING INSTRUCTION Insert the video probe tool into our NEUTRIK FOCD- STQ service tool (D). To inspect the LC ferrule surface focus the video probe by rotating the focus wheel (E). Clean the LC surface with the Dry Cleaner 1.25 mm over the NEUTRIK QUAD service tool.
Page 4
QUAD ® HANDLING INSTRUCTION After the cleaning procedure unlock the NEUTRIK inspection tool (G). Wet cleaning using lint-free wipes Press forward the twist prevention and untight the connector bushing and remove carefully the insert of the connector housing. Inspect the LC connectors with a video probe tool.