Epson SC-F100 Series User Manual page 87

User's Guide
Important:
c
Wipe off the smear gently. If you press the cotton swab too hard to the film, the springs of the film may be
dislocated and the printer may be damaged.
6. Use a new dry cotton swab to wipe the film.
Important:
c
Do not leave any fibers on the film.
Note:
To prevent the smear from spreading, frequently replace the cotton swab with a new one.
7. Repeat steps 5 and 6 until the film is not smeared.
8. Visually check that the film is not smeared.
9. Close the printer cover.
Note:
The printer cover is designed to close slowly and resist a little as a precaution against catching fingers. Continue to close
even if you feel some resistance.
Maintaining the Printer
87