Shutting Down The Projector - ViewSonic M1 User Manual

Shutting Down the Projector

1. Press and hold the Power button for three (3) seconds on the projector, or press
the Power button on the remote control.
2. Pressing the Power button on the remote control will result in the following
message:
3. Press the Up/Down buttons on the remote control to select Turn Off and press
OK on the remote control.
NOTE: When not in use, please press the Power button to power off. If only
using the Power button on the remote control to power off, the projector
will enter standby mode and the embedded battery will still consume
some power.
20