Battery And Fuse Replacement - Mercury MTB01 User Manual

BATTERY AND FUSE REPLACEMENT

Fuse rarely need replacement and blow almost always as
a result of operator error.
If " " appears in display, it indicates that the battery
should be replaced.
To replace battery & Fuse (F500mA/250V for mA terminal
and F5A/250V for 5A terminal) remove the 2 screws in
the bottom of the case, simply remove the old, and
replace with a new one. Be careful to observe polarity.
ACCESSORIES
➢
Operator's instruction manual
➢
Set of test leads (red and black)
➢
9-volt battery, NEDA 1604 6F22 type.
This product is classed as Electrical or Electronic equipment and
should not be disposed with other household or commercial waste
at the end of its useful life. The goods must be disposed of
according to your local council guidelines.
Copyright© 2020 AVSL Group Ltd, Unit 2 Bridgewater Park,
EN61010–1:2010
Taylor Road, Trafford Park, Manchester. M41 7JQ.
Errors and omissions excepted.
600.101/102UK User Manual