Table of Contents
Advertisement
DOK-INDRV*-HXX05******-PR02-EN-P
Rexroth IndraDrive ML Drive Systems with HMU05
Steps to follow
1. Drill all holes for mounting the device in control cabinet, incl. holes for
HAS10.1-002
mounting plates.
2. Mount stop plates to top plate using 8 × M8.
3. Pre-assemble stand using M8 and adjust it to device size (1, 2 or 3
plates)
4. Fit stand to screws of HAS10.1-002 mounting plate and screw it on.
5. To adjust, screw 2 × M8 to bottom plate of stand.
Bosch Rexroth AG
Cables, accessories, additional components
153/407
Advertisement
Table of Contents
