Mounting And Installation; Mounting Hmu05 Devices In Control Cabinet; Electrical Connection; Overall Connection Diagram (Hmu05 As Drive Controller) - Bosch Rexroth IndraDrive ML Series Project Planning Manual

DOK-INDRV*-HXX05******-PR02-EN-P
Rexroth IndraDrive ML Drive Systems with HMU05
6

Mounting and installation

6.1

Mounting HMU05 devices in control cabinet

Notes on mounting
6.2

Electrical connection

6.2.1

Overall connection diagram (HMU05 as drive controller)

6.2.2

Overall connection diagram (HMU05 as supply unit)

Overall connection diagram with load contactor

Overall connection diagram with controllable main switch

HMU05 drive controllers were designed to be mounted in control cabinets.
● When mounting, observe the mandatory minimum distances between
components (see chapter 4.5.1 "Dimensions" on page
● Tightening torque of the M10 mounting screws: 48 Nm
● Mounting tools: HAS08.1-008-NNN-MH
Description of the individual mounting steps: See
net installation kit (HAS08.1-008)" on page
● Mounting accessories:
– Mounting plate for device width 200 mm:
See chapter "Mounting plate for device width 200 mm
(HAS10.1-002-005)" on page
– Mounting plate for device width 220 mm:
See chapter "Mounting plate for device width 220 mm
(HAS10.1-002-006)" on page
See chapter 4.6.1 "Overall connection diagram (HMU05 as drive controller)"
on page 94.
See chapter "Overall connection diagram with load contactor" on page
See chapter "Overall connection diagram with a controllable main switch" on
page 96.
Bosch Rexroth AG
Mounting and installation
82).
chapter 8.2.2 "Cabi‐
149.
HAS10.1-002-005
162.
HAS10.1-002-006
164.
123/407
95.