Zanussi 291164 Specifications

RANGE
COMPOSITION
The range consists of 2 gas and steam
models with 1 well and 2 automatically tilting
baskets, ideal for the cooking in water of
pasta, rice, minestrones, boiled meat etc.
FUNCTIONAL AND
CONSTRUCTION
FEATURES
� External panelling and load bearing frame in
304 AISI stainless steel. Cooking well with
rounded corners in 316 AISI stainless steel and
fitted with an overflow pipe. The combustion
chamber is in 309 AISI stainless steel (CR/40 G).
Jacketed well in 18/10 stainless steel (CR/40 V)
� Cooking basket and all other parts in contact
with water are made from 316 AISI stainless steel
Elevating basket which is automatically tilted
�
at the end of the cooking cycle by an
electromechanic linear activator fed at low
tension (24 V)
� Electrovalve with probe to prevent heating in
the case of no water. Automatic ignition when
water reaches minimum level
Electronic control end limit basket
�
� Automatic water filling and automatic water
topping up
� Large drainage tap with insulated handle
positioned on the front of the appliance
� Insulated lid and handle in 304 AISI stainless
steel fitted on hinges with counter-balancing
springs
CR 40 AUTOMATIC PASTA COOKERS
� Simple and functional control panel provided
with transparent pexiglass protection.
� Tilting lower panel or easily removed front
panels for quick and easy access to the working
parts
� Heating by stainless steel burners
Safety valve and flame failure device for
�
cutting off the gas flow if the pilot light is
accidentally extinguished (CR/40 G)
� Automatic electronic ignition (CR/40 G).
All gas appliances are supplied for use with
�
natural gas (methane), with LPG conversion jets
supplied as standard
SPECIAL MACHINES
� Steam supply pressure 0.5 bar (CR/40 V)
� Controls and safety unit consisting of safety
valve, depressurising valve and pressure gauge
(CR/40 V)
Steam flow controlled by means of a ball valve
�
(CR/40 V)
� A drainpipe for condensing water for steam
appliances is compulsory
� All models comply with the standards required
by the main international approval boards and are
H marked
TECHNICAL DATA
CHARACTERISTICS
Power supply
External dimensions - mm
width
depth
height
height adjustment
N° of wells
Usable well dimensions - mm
width
depth
height
Number of baskets
Basket load capacity - kg
Steam consumption at 0.5 bar - kg/h
Power - kW
auxiliary
Net weight - kg.
Supply voltage
ZANUSSI
P R O F E S S I O N A L
MODELS
CR40G CR40V
291164 291165
Gas Steam & Electric
1600 1600
1280 1280
850 850
50 50
1 1
625 625
640 640
410 410
2 2
20 20
100
0.25 0.25
386 345
230 V, 1N, 50 230 V, 1N, 50