Table of Contents
Advertisement
Quick Links
Installation and Operational Instructions for
®
ROBA-stop
Holding Brake Type 820.61_._
Please read these Installation Instructions carefully and follow them accordingly!
Ignoring these Instructions may lead to malfunctions or to brake failure, resulting in damage to other parts.
Contents:
Page 1: - Contents
- Declaration of Conformity
Page 2: - Safety Regulations
Page 3: - Safety Regulations
Page 4: - Brake Illustrations
Page 5: - Installation Conditions
- Installation
Page 6: - Brake Inspection
Page 7: - Electrical Connection
- Terminal Box Installation
Page 8: - Maintenance
Declaration of Conformity
A conformity evaluation for the applicable EU directives has been carried out for this product.
The conformity evaluation is set out in writing in a separate document and can be requested if required.
It is forbidden to start use of the product until the machine or system into which it should be built is operating in accordance with all
applicable EU directives.
Without a conformity evaluation, this product is not suitable for use in areas where there is a high danger of explosion.
This statement is based on the ATEX directive.
Please Observe!
According to German notation, decimal points in this document are represented with a comma (e.g. 0,5 instead of 0.5).
08/02/2010 K/GC/RJ/GF
Page 1 of 8
Chr. Mayr GmbH + Co. KG
Eichenstraße 1
D-87665 Mauerstetten
Germany
(B.1110.6.GB)
Tel.: 08341 / 804-0
Fax: 08341 / 804-421
http://www.mayr.de
eMail:
info@mayr.de
Advertisement
Table of Contents
Related Manuals for Mayr ROBA-stop 820.61 Series
Summary of Contents for Mayr ROBA-stop 820.61 Series
- Page 1 This statement is based on the ATEX directive. Please Observe! According to German notation, decimal points in this document are represented with a comma (e.g. 0,5 instead of 0.5). 08/02/2010 K/GC/RJ/GF Chr. Mayr GmbH + Co. KG Tel.: 08341 / 804-0 Eichenstraße 1 Fax: 08341 / 804-421 D-87665 Mauerstetten http://www.mayr.de...
- Page 2 Insulation Material Class F (+155 ° C) The magnetic coil and the casting compound are suitable for use up to a maximum operating temperature of +155 ° C. 08/02/2010 K/GC/RJ/GF Chr. Mayr GmbH + Co. KG Tel.: 08341 / 804-0 Eichenstraße 1 Fax: 08341 / 804-421 D-87665 Mauerstetten http://www.mayr.de...
- Page 3 GmbH + Co. KG Sales and Delivery Conditions. in open air conditions, unprotected from the weather. ® Mistakes or deficiencies are to be reported to mayr Take precautions against freeze-up of the friction surfaces in once! high humidity and at low temperatures.
- Page 4 Please report transport damage immediately to the deliverer. hand release (see page 6). Please report incomplete delivery and obvious defects to the manufacturer. 08/02/2010 K/GC/RJ/GF Chr. Mayr GmbH + Co. KG Tel.: 08341 / 804-0 Eichenstraße 1 Fax: 08341 / 804-421 D-87665 Mauerstetten http://www.mayr.de...
- Page 5 0,30 0,30 0,40 0,45 0,50 0,50 0,50 0,50 0,70 [mm] * as the operating temperature increases, the max. air gap can decrease. 08/02/2010 K/GC/RJ/GF Chr. Mayr GmbH + Co. KG Tel.: 08341 / 804-0 Eichenstraße 1 Fax: 08341 / 804-421 D-87665 Mauerstetten http://www.mayr.de...
- Page 6 Table 2 Adjustment ® ROBA-stop dimension "X" size [mm] Inspection hole Fig. 4 08/02/2010 K/GC/RJ/GF Chr. Mayr GmbH + Co. KG Tel.: 08341 / 804-0 Eichenstraße 1 Fax: 08341 / 804-421 D-87665 Mauerstetten http://www.mayr.de Page 6 of 8 Germany eMail: info@mayr.de...
- Page 7 50 Terminal box - lid 51 Sealing ring 52 Cap screw M4 x 30 53 Sealing washer Fig. 6 08/02/2010 K/GC/RJ/GF Chr. Mayr GmbH + Co. KG Tel.: 08341 / 804-0 Eichenstraße 1 Fax: 08341 / 804-421 D-87665 Mauerstetten http://www.mayr.de...
- Page 8 The brake is switched AC-side Switch DC-side Delayed brake engagement 08/02/2010 K/GC/RJ/GF Chr. Mayr GmbH + Co. KG Tel.: 08341 / 804-0 Eichenstraße 1 Fax: 08341 / 804-421 D-87665 Mauerstetten http://www.mayr.de...
Need help?
Do you have a question about the ROBA-stop 820.61 Series and is the answer not in the manual?
Questions and answers