Dynamic braking torque ............8 Run-in procedure / Conditioning of the friction lining pairing ..8 Views ..................9 Parts List (Only use mayr original parts) ......10 Table 1: Technical Data ............11 17/06/2024 GF Chr. Mayr GmbH + Co. KG Eichenstraße 1, D-87665 Mauerstetten, Germany...
We would hereby like to point out that the proportion of lead used here is not prohibited according to the REACH Regula- tion. It is merely necessary to declare the use of this substance. 17/06/2024 GF Chr. Mayr GmbH + Co. KG Eichenstraße 1, D-87665 Mauerstetten, Germany Phone: +49 8341 804-0, Fax: +49 8341 804-421...
When calculating the friction work, please observe that the brake nominal torque is subject to a tolerance. 17/06/2024 GF Chr. Mayr GmbH + Co. KG Eichenstraße 1, D-87665 Mauerstetten, Germany Phone: +49 8341 804-0, Fax: +49 8341 804-421 your reliable partner Page 4 of23 www.mayr.com, E-Mail:...
The insulation components on the magnetic coils are manufac- tured at least to class of insulation F (+155 °C). 17/06/2024 GF Chr. Mayr GmbH + Co. KG Eichenstraße 1, D-87665 Mauerstetten, Germany Phone: +49 8341 804-0, Fax: +49 8341 804-421...
DIN EN 61000-6-4 Interference emission The guarantee conditions correspond with DIN EN 61000-6-2 Interference immunity the Chr. Mayr GmbH + Co. KG sales and delivery condi- tions. ® Mistakes or deficiencies are to be reported to mayr once!
EN ISO 13849-1 through identification of the safety function. This is in principle the task of the system manufacturer. Safety parameters can be requested if required. ® In case of deviating designs, please consult with mayr power transmission directly. Definition of the Braking Torques Static braking torque Effectively averaged, fully developed torque for slipping brake with smallest speed values.
Installation and Operational Instructions for ® ROBA-stop -M Servo-Pitch-Brake Type 891.10_._ Size 60, 100, 150, 250, 500, 1000 (B.891.10_._.EN) (Only use mayr original parts) Parts List Item Name Coil carrier assembly (with magnetic coil) Armature disk Rotor (Friction lining)
Page 11
2) Braking torque tolerance = +40 % / -20 % (friction lining pairing conditioning necessary) 4) In relation to the maximum speed n (switching frequency 1/h) 17/06/2024 GF Chr. Mayr GmbH + Co. KG Eichenstraße 1, D-87665 Mauerstetten, Germany Phone: +49 8341 804-0, Fax: +49 8341 804-421 your reliable partner Page 11 of23 www.mayr.com, E-Mail:...
Page 12
Ød Ød Size DIN 6885/1 DIN 6885/1 DIN 6885/3 1000 17/06/2024 GF Chr. Mayr GmbH + Co. KG Eichenstraße 1, D-87665 Mauerstetten, Germany Phone: +49 8341 804-0, Fax: +49 8341 804-421 your reliable partner Page 12 of23 www.mayr.com, E-Mail: public.mayr@mayr.com...
Depending on the application, the switching contact can also be ® protected by other protection circuits (e.g. mayr -spark quench- Schematic wiring diagram 2 ing unit), although this may of course then alter the switching The power circuit is interrupted between the power supply and times.
DC voltage module, the limit values are determined electrically and may deviate from the wear values. 17/06/2024 GF Chr. Mayr GmbH + Co. KG Eichenstraße 1, D-87665 Mauerstetten, Germany Phone: +49 8341 804-0, Fax: +49 8341 804-421 your reliable partner Page 19 of23 www.mayr.com, E-Mail:...
(6), leading to a mended. drop in torque. 17/06/2024 GF Chr. Mayr GmbH + Co. KG Eichenstraße 1, D-87665 Mauerstetten, Germany Phone: +49 8341 804-0, Fax: +49 8341 804-421 your reliable partner Page 20 of23 www.mayr.com, E-Mail:...
® mayr , or for damage resulting from the use of these products. 17/06/2024 GF Chr. Mayr GmbH + Co. KG Eichenstraße 1, D-87665 Mauerstetten, Germany Phone: +49 8341 804-0, Fax: +49 8341 804-421 your reliable partner Page 23 of23 www.mayr.com, E-Mail:...
Need help?
Do you have a question about the ROBA-stop-M 891.10 Series and is the answer not in the manual?
Questions and answers