Table of Contents
Advertisement
Quick Links
Installation and Operational Instructions for
®
ROBA
-quick Type 520.1_ _ and Type 520.2_ _.0
Sizes 3 to 9
Please read these Operational Instructions carefully and follow them accordingly!
Ignoring these Instructions may lead to malfunctions or to brake failure, resulting in damage to other parts.
These Installation and Operational Instructions (I + O) are part of the brake delivery.
Contents:
Page 1: - Contents
- Safety and Guideline Signs
- Guidelines on EU Directives
Page 2: - Safety Regulations
Page 3: - Safety Regulations
Page 4: - Safety Regulations
Page 5: - Brake Illustrations
- Parts List
- Technical Data
Page 6: - Scope of Delivery / State of Delivery
- Function
- Design
- Explanation of Terms
- Torque Characteristics
Page 7: - Run-in Conditions
- Installation Examples
Page 8: - Installation
- Electrical Connection
- Maintenance and Inspection
- Disposal
Page 9: - Malfunctions / Breakdowns
Guidelines on the Declaration of Conformity
A conformity evaluation has been carried out for the product (electromagnetic pole face brake) in terms of the EC low
voltage directive 2006/95/EC. The Declaration of Conformity is laid out in writing in a separate document and can be
requested if required.
Guidelines on the EMC Directive (2004/108/EC)
Guidelines on the Machinery Directive (2006/42/EC)
is a component for installation into machines according to the Machinery Directive 2006/42/EC.
The brakes can fulfil the specifications for safety-related applications in coordination with other elements.
The type and scope of the required measures result from the machine risk analysis. The brake then becomes a machine
component and the machine manufacturer assesses the conformity of the safety device to the directive.
It is forbidden to start use of the product until you have ensured that the machine accords with the regulations stated in the
directive.
Guidelines on the ATEX Directive
Without a conformity evaluation, this product is not suitable for use in areas where there is a high danger of explosion.
For application of this product in areas where there is a high danger of explosion, it must be classified and marked
according to directive 94/9/EC.
26/08/2013 TK/RB/SU
Page 1 of 9
Please keep them handy and near to the brake at all times.
Chr. Mayr GmbH + Co. KG
Eichenstraße 1, D-87665 Mauerstetten, Germany
Tel.: +49 8341 804-0, Fax: +49 8341 804-421
www.mayr.com, E-Mail:
Safety and Guideline Signs
DANGER
Immediate and impending danger, which can
lead to severe physical injuries or to death.
CAUTION
Danger of injury to personnel and
damage to machines.
Please Observe!
Guidelines on important points.
___________________________________________________
According to German notation, decimal points
in this document are represented with a
comma (e.g. 0,5 instead of 0.5).
info@mayr.com
(B.5.2.EN)
Advertisement
Table of Contents
Related Manuals for Mayr ROBA-quick
Summary of Contents for Mayr ROBA-quick
- Page 1 For application of this product in areas where there is a high danger of explosion, it must be classified and marked according to directive 94/9/EC. 26/08/2013 TK/RB/SU Chr. Mayr GmbH + Co. KG Eichenstraße 1, D-87665 Mauerstetten, Germany Tel.: +49 8341 804-0, Fax: +49 8341 804-421 Page 1 of 9 www.mayr.com, E-Mail:...
-
Page 2: Safety Regulations
Only carry out installation, maintenance and repairs in a de-energised, disengaged state and secure the system against inadvertent switch- 26/08/2013 TK/RB/SU Chr. Mayr GmbH + Co. KG Eichenstraße 1, D-87665 Mauerstetten, Germany Tel.: +49 8341 804-0, Fax: +49 8341 804-421 Page 2 of 9 www.mayr.com, E-Mail:... - Page 3 ® The brake is designed for Protection Class I. This protection to VDE 0580, which is integrated in mayr -rectifiers. To covers not only the basic insulation, but also the connection of all...
- Page 4 - the brakes are handled or operated incorrectly. EN 60204-1 Electrical equipment of machines Guarantee The guarantee conditions correspond with the Chr. Mayr GmbH + Co. KG sales and delivery conditions. ® Mistakes or deficiencies are to be reported to mayr once!
-
Page 5: Parts List
Please observe run-in specifications and minimum speed acc. Table 2 Not included in the standard scope of delivery 26/08/2013 TK/RB/SU Chr. Mayr GmbH + Co. KG Eichenstraße 1, D-87665 Mauerstetten, Germany Tel.: +49 8341 804-0, Fax: +49 8341 804-421 Page 5 of 9 www.mayr.com, E-Mail:... -
Page 6: Torque Characteristics
The relative duty cycle is the ratio of duty cycle to cycle time in percent (% duty cycle). 26/08/2013 TK/RB/SU Chr. Mayr GmbH + Co. KG Eichenstraße 1, D-87665 Mauerstetten, Germany Tel.: +49 8341 804-0, Fax: +49 8341 804-421 Page 6 of 9 www.mayr.com, E-Mail:... - Page 7 (values should lie above the minimum values, Table 2) Allow to synchronise approx. 2 – 3 minutes Fig. 3 26/08/2013 TK/RB/SU Chr. Mayr GmbH + Co. KG Eichenstraße 1, D-87665 Mauerstetten, Germany Tel.: +49 8341 804-0, Fax: +49 8341 804-421 Page 7 of 9 www.mayr.com, E-Mail:...
-
Page 8: Electrical Connection
Please observe the maximum permitted centre offset "V" according to Table 1 and Figs. 4 and 5. 26/08/2013 TK/RB/SU Chr. Mayr GmbH + Co. KG Eichenstraße 1, D-87665 Mauerstetten, Germany Tel.: +49 8341 804-0, Fax: +49 8341 804-421 Page 8 of 9 www.mayr.com, E-Mail:... - Page 9 ® mayr , or for damage resulting from the use of these products. 26/08/2013 TK/RB/SU Chr. Mayr GmbH + Co. KG Eichenstraße 1, D-87665 Mauerstetten, Germany Tel.: +49 8341 804-0, Fax: +49 8341 804-421 Page 9 of 9 www.mayr.com, E-Mail:...
Need help?
Do you have a question about the ROBA-quick and is the answer not in the manual?
Questions and answers