Washing And Disinfection - Invacare rea Azalea Series Service Manual

Washing and Disinfection

Washing and Disinfection
1. Remove back- and seat cushions and wash these in a washing machine
2. If the wheelchair is very dirty we recommend that you remove the back
3. Rinse the wheelchair with a high-pressure or ordinary jet of water depending
4. Spray the chair with alcohol for disinfection.
5. Spray the wheelchair with detergent, for example a car-cleaning agent with
6. Leave the detergent to work for a couple of minutes.
7. Rinse the wheelchair with a high-pressure or ordinary jet of water depending
8. Check that the chair is clean.
9. Leave the chair to dry in a drying cabinet. Remove parts where water has
10. Check that the chair is dry, wipe with a cloth if needed. Also check that all
11. If the wheelchair is not very dirty it may be sufficient to spray with alcohol
12. The wheelchair is now reconditioned.
Dartex
Superficial dirt on the coating may be removed by wiping with a soft cloth
moistened with water containing a neutral detegent. More persistent con-
tamination may be treated by wiping with alcohols or turpentine substitute,
followed by hot water and detergent.
Proprietary disinfectants may be used provided manufacturer's instructions
are followed. The fabric may be washed at temperatures up to 71° C (160° F).
using normal detergent.
following the washing instructions for each article.
and seat to make it easier to wash.
on how dirty the chair is. Do not aim the jet towards bearings and draining
holes. If the wheelchair is washed in a machine the water must not be hotter
than 60 degrees.
wax.
on how dirty the chair is. Do not aim the jet towards bearings and draining
holes.
collected. If the chair has been washed in a machine, blow-drying with
compressed air is recommended.
labels are readable, if not change them (e.g. labels and stickers for tilting,
and attachment points for transport.).
and wiping dry with a cloth.
6