BENETEAU OCEANIS 50 NEW Owner's Manual page 57

E
LECTRICAL CIRCUIT
G
ENERAL RECOMMENDATIONS
Certain vessels are equipped (as either standard or optional features depending on the model)with a 110 V or
230 V circuit.
The following measures are recommended in order to avoid the danger of electrical shock and fire:
- Never work on a live electric fitting.
- Plug in the boat/shore supply cable in the boat before you plug it into the shore supply socket.
- Never let the end of the boat/shore supply cable hang in the water.
- Turn off the shore supply with the onboard cut-off switch before connecting or disconnecting the vessel/
shore supply line.
- Disconnect the ship/shore power cable at the shore socket first.
- Check the polarity indicator for the shore connections (110V AC version).
- If the reverse polarity indicator is activated immediately disconnect the cable. Rectify the polarity fault
before using the vessel's electrical installation.
- Close the shore supply input cover firmly after use.
- Do not modify the vessel/shore supply line connections; only use compatible connections.
- Do not alter the vessel's electrical system. The installation, modifications and maintenance must be
carried out by a qualified marine electricity technician. Check the system at least twice a year.
- Disconnect the vessel supply when the system is not being used. This is to prevent the danger of fire.
- Use double insulated or earthed appliances.
Note that the live wires are brown, the neutral ones are blue and the earth wires are green and yellow.
Electrical equipment
, 110-220 V
7
53
D
ANGER
-Never let the end of the boat/shore supply
cable hang in the water: The result may
be an electric field liable to hurt or kill the
swimmers nearby.
-There may be danger of electrocution if
alternating current systems are incorrectly
used.
P
RECAUTION
-Never modify an electric fitting and
relevant diagrams yourself.
-Call in a technician skilled in marine
electricity to carry out any electric
modification.
-Never change the breaking capacity
(amperage) of the overcurrent safety
devices.
-Never install or replace the electric
appliances (or any electric equipement)
by components exceeding the capacity
(amperage) of the circuit (Watt for bulbs).
A - R
DVICE ECOMMENDATION
-In order to reduce the risks of electic shock
and fire:
-Before you plug in or unplug the boat/
shore supply cable, switch off the shut off
device connected to the shore supply.
-Plug in the boat/shore supply cable in the
boat before you plug it into the shore
supply socket.
-Unplug the boat/shore supply cable on
shore first. Close the shore socket cover.
-Do not modify the connections of the boat/
shore supply cable