Keithley PIO-12 User Manual page 10

• S T C - 3 7 - screw terminal connector panel. This accessory connects
directly the the main I/O connector of the P10-12 to provide
general-purpose screw-terminal connections in a compact form
factor.
• S S I O - 2 4 - 24-channel mounting panel for up to 24 solid-state,
miniature I/O modules with functions of DC input, DC output, AC
input, and AC output. The SSIO-24 connects to the main 1/0
connector of the PIO-12 through a C-1800 cable.
• S R A - 0 1 - 8-channel mounting panel for up to eight solid-state,
miniature I/O modules. The SRA-01 connects to the main 1/0
connector of the P10-12 through a C-1800 cable.
• E R B - 2 4 - electrical relay board. This accessory provides 24
electromechanical double-pole, double-throw relays for controlling
and switching up to 3 A at 120 ViThs. The ERB-24 connects to the
main 1/0 connector of the P10-24 through a C-1800 cable.
• E R A -01 - electrical relay accessory containing eight single-pole,
double-throw relays that can switch up to 3 A at 120 Vrms.
• C - 1 8 0 0 - cable. The C-1800 is an 18-inch ribbon cable terminated at
both ends with 37-pin D-type connectors.
• S - 1 8 0 0 - cable. The S-1800 is a shielded version of the C-1800.
Refer to Chapter 4 for cable connections for these accessories.
1-3