Pioneer PDP-425CMX Service Manual page 182

1
A
Remote control unit
1
2
B
3
4
5
6
C
7
8
9
When handling the remote control unit
D
¶ Do not drop the remote control unit or expose it to
moisture.
¶ Do not use the remote control unit in a location subject to
direct sunlight, heat radiation from a heater, or in a place
subject to excessive humidity .
¶ When the remote control unit 's batteries begin to wear out,
the operable distance will gradually become shorter. When
this occurs, replace all batteries with new ones as soon as
possible.
1
SCREEN SIZE button
E
Press to select the screen size.
2
INPUT buttons
Press to select the input.
3
MENU button
Press to open and close the on-screen menu.
4
ADJUST (5/ ∞/ 2/ 3) buttons
Use to navigate menu screens and to adjust various
settings on the unit.
F
182
1
2
5
SET button
Press to adjust or enter various settings on the unit.
6
SUB INPUT button
During multi-screen display, use this button to change
inputs to subscreens.
0
7
SPLIT button
Press to switch to multi-screen display.
-
8
MUTING button
=
Press to mute the volume.
9
ID NO. SET button
Button used by professional installers.
0
AUTO SET UP button
~
When using computer signal input, automatically sets
the [POSITION], [CLOCK] and [PHASE] to optimum
!
values.
-
STANDBY/ON button ( )
Press to put the unit in operation or standby mode.
@
=
#
DISPLA Y button
Press to view the unit 's current input and setup mode.
$
~
POINT ZOOM button
%
Use to select and enlarge one part of the screen.
!
FREEZE button
When memo screen function is enabled, a still image
is displayed in the subscreen.
@
SWAP button
During multi-screen display, use this button to switch
between main screen and subscreen.
#
PIP SHIFT button
When using the picture-in-picture mode with multi-
screen display, use this button to move the position of
subscreen.
$
VOLUME (+/ –) buttons
Use to adjust the volume.
%
CLEAR button
Button used by professional installers.
PDP-425CMX
2
3
3
4
4