SMSL Sanskrit 10th User Manual page 17

Instructions
1. POWER / INPUT KEY
1） Hold the key to switch power OFF,press the key to switch power ON.
2） Press the key to switch INPUTS between "USB, COAXIAL, OPTICAL" which display
as "in1, in2, in3".
2. ROTATE THE UNIT
The Sanskrit 10th is designed for minimized desktop usage, which has 3 setup modes showed as
below-in these modes, the display will rotate by itself because the Sanskrit 10th has built-in digital
accelerometer, and it will sense the direction it is in.
Note: Sanskrit 10th must be placed horizontally, otherwise the display may not work properly！
3. TURN OFF THE DISPLAY
The Sanskrit 10th can be turned off the display for you to enjoy the music without light interfere.
1 ) Use the "FN" key of remote controller to switch on or off this function.
2 ) When the display is off, a blue LED will lit indicating this mode.
3 ) When in display-off mode, any operation will make display recovery for 5 seconds.
Sanskrit 10th