eisenblatter PIPE SNIPER 802 HT Original Instructions Manual page 11

PIPE SNIPER® 802 HT
The true 2/3 enclosure
allows machining pipes
through 360 degrees from a
single position
Simply adjusting the
clamping lever allows the
return roller enclosure angle
to be adjusted to any pipe
diameter (25 - 70 mm)
OVERVIEW OF PRODUCT ADVANTAGES
• Minimal force required due to the revolutionary, sophi-
sticated enclosure system
• The true 2/3 enclosure (for diameters of 30 to 42 mm)
allows machining pipes through 360 degrees from a
single position. The arms are closed by pulling a lever.
• Ideal for pipe diameters of 25 – 70 mm
• Innovative technology: gas pressure damping system
reduces force required and allows pipe to be gently
enclosed.
• The balanced shaft handle with non-slip rubber inserts
allows the tool to be operated easily in any conceivable
position.
New aluminium The balanced bar handle allows
lever makes the tool to be operated easily in
enclosing the pipe any conceivable position
extremely easy
with minimum force
Innovative technology: New
gas pressure damping sys-
tem reduces force required
and allows pipe to be gently
enclosed
DUST PREVENT SYS-
TEM keeps dust and
metal particles out
Combination/
locking switch
Specially encapsulated fi eld
coil and rotor for maintenan-
ce-free continuous operation
• Extremely powerful motor (1,750 W) and new HT (high
torque) transmission mechanics for wear-resistant power
transmission – made entirely in Germany.
• Planetary gear provides maximum torque throughout the
speed range (820 to 3,000 rpm, belt speed 2,5 – 9,2
m/sec) with a tacho-generator for constant speed, even
under load.
• New, optimised building components for reduced weight
• Especially robust and kink-proof cable ensures long
service life
Especially robust
and kink-proof cable ensures
long service life
11