Display icon legend
Bluetooth not
connected
Bluetooth connected
0 bar: 0%
1 bar: 1%-20%
2 bar: 21%-40%
Factory reset
Restoring the factory settings can be performed through the app.
Open the app on the mobile device and navigate to Settings - Device Settings – Reset. The
watch will restart and will enter an inactive state. The device memory data is cleared, and
the watch is restored to factory parameters.
Charge Status
The screen will be illuminated while charging, showing the charging scroll animation. The
watch cannot be operated while charging. When the watch is fully charged, the full power
icon will appear, and the screen will dim after 30 seconds.
3 bar: 41%-60%
4 bar: 61%-80%
Full bar: 81%-100%
Display hours and minutes
12-hour display AM, PM