Advertisement
Advertisement
Table of Contents
Related Manuals for Kogan ACTIVE PRO GPS ALWAYS-ON DISPLAY SMART WATCH
Summary of Contents for Kogan ACTIVE PRO GPS ALWAYS-ON DISPLAY SMART WATCH
- Page 1 ACTIVE PRO GPS ALWAYS-ON DISPLAY SMART WATCH KATPROGPSWA...
-
Page 3: Safety And Warnings
They are not applicable to the diagnosis, monitoring, treatment or prevention of any diseases or symptoms. The heart rate data is for reference only. Kogan is not responsible for any consequences caused by any data deviation. -
Page 4: App Installation
APP INSTALLATION 1. Turn On The unit will automatically turn on after charging. Note: The Watch must be charged and activated before the first use. Use only the original power adapter to charge the watch. Turn on by pressing and holding DOWN button. - Page 5 2. Download and Install VeryFitPro You can directly scan the QR code to download VeryFitPro or search “VeryFitPro” in the APP store to download and install. Note: The hardware requirements for connecting to a smart device are shown below. iOS 9.0 and above Android 4.4 and above Bluetooth 4.2 3.
- Page 6 4. Bind the Device Go to the App home page to show the binding request. Select the product model and tap “Confirm Binding” to complete binding. The operations are as follows:...
-
Page 7: Operation
OPERATION Up button Screen Down button 1. Instructions In screen locked state: Unlock screen Sibling interface: Circularly flip Pop-up interface: Confirm During stopwatch/timer working: Press Pause/Continue UP Button During sports paused: Continue sport During sports: Pause sports Other interfaces: Quickly launch sports In screen locked state: Unlock screen Press and hold During sports paused: Stop sports... - Page 8 2. Operation on Screen Select to enter the next interface/select current item. Tap and hold in the main Tap and hold dial interface to enter dial Screen switching interface. Switch interfaces left and Slide left/right right. Switch interfaces up and Slide up/down down.
- Page 9 Sports Function 1. Activate Sports Enter Sports list interface, slide up or down to select sports item and tap icon to start sports. 2. Start Sports When Outdoor Running is activated, the Watch will scan for GPS signals automatically. You can tap Skip Icon to skip GPS positioning, but motion trail cannot be displayed prior to successful positioning.
- Page 10 4. Reminders during Sports During sports, the Watch will continuously detect your current heart rate. If the current heart rate exceeds the maximum heart rate, the Watch will remind you to reduce sports intensity or stop sports through vibration and interface alarm. Set your safe heart rate reminder through More>Heart rate zone>User defined Maximum Heart rate is in the mobile APP.
- Page 11 2. Notifications Turn on smart reminder Enable “Smart Reminder” in the APP, then select and enable notification types to be reminded. This function requires a constant Bluetooth connection between the Watch and mobile phone. View message When receiving s message, the Watch will vibrate to alert you. If the message is not immediately viewed after being received, slide down to view the message.
- Page 12 4. Blood Oxygen The Watch supports blood oxygen detection. Slide to Blood Oxygen Detection interface, hold for two seconds, and the Watch will automatically detect blood oxygen levels. Stand still and keep your arm steady during the detection so that the Watch can output more accurate blood oxygen data.
- Page 13 Timer Allows setting a countdown timer. The watch will vibrate once this time has elapsed. Alarm clock You can set alarm clocks from the mobile APP. When it is the set time, the Watch will alert you through vibration. In the case of no operation after 20 seconds, the alarm clock will automatically stop.
-
Page 14: Cleaning And Care
CLEANING & CARE Replace watch strap Use a soft brush or clean soft cloth to clean the Watch. Remove the Watch from your wrist and disconnect all connections with other equipment before cleaning and maintenance. Keep the Watch and its accessories dry. Do not dry them with external heating equipment such as a microwave oven or hair dryer. -
Page 15: Troubleshooting
TROUBLESHOOTING Problem Solution 1. It is recommended to update VeryFitPro to the latest version. 2. It is recommended to quit all APPs, Mobile phone cannot be connected to the reactivate the phone Bluetooth and re- Watch. connect. 3. Confirm that the system of the phone is Android 4.4 or iOS 9.0 and above. - Page 16 This is a Quick Start Guide, and we hope that this has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...