Kogan HYBRID+ User Manual page 5

Notes:

Fully charge the watch before using it; it takes about two hours to complete a full
charge. When using a computer USB port or other devices as a charging source it
may take up to 3 hours to fully charge the watch.

Use the charger only on a flat and stable surface.

If there is an obstacle between the watch and the charging base, the watch may
not charge properly.

After charging the watch, turn off the power to the charger. To avoid damaging
the watch, use the original charging accessories provided.

Do not use the charging device if it is damaged.

Disconnect the charging device during the cleaning of the watch, during a
thunderstorm or after a prolonged period of inactivity.

Do not attempt to disassemble or modify the watch, the charging cable, or the
charging base.

Do not twist or pinch the charging cable.

Do not attempt to remove or replace the battery. The substances contained in this
product and the battery can cause damage to the environment or health. Ensure
to dispose of it properly in accordance with local regulations.
Battery
The fully charged battery can last for about 3 days. If the charge is insufficient, the smart
functions will be automatically deactivated, and the hands will continue to indicate the time
for approximately 30 days.
WARNING:
on the average use of the smartwatch. The actual duration may vary
depending on the use of the device and based on the amount and time of
activity of the functions and notifications.
The battery life with smart functions active is estimated based