Physirun Lab Analysis; Get The Recorded File; Analyse Your File With Physirun Lab; Load Your File In Physirun Lab - Gait up PhysiRun Lab User Manual

4. PhysiRun Lab analysis

If you don't have files to analyse yet please read the part 3 of this user's guide.

4.1 Get the recorded file

To obtain your file follow the steps below:
—Connect your sensors Physilog
—Select your sensors in the USB device list on your computer
—Save your file in the same folder on your computer ("1LF091.BIN" for example). If the time
is correctly configured you file is saved in a folder at the date of measurement (for example
"18_10_25" for October 25
"NO_DATE" folder in the order of recordings. You can also find your data by using the file
creation time and the size of the files.
WARNING: You have to save the files of both feet in the same folder otherwise the
analysis cannot work.

4.2 Analyse your file with PhysiRun Lab

4.2.1 Load your file in PhysiRun Lab

The software is located in the USB key provided in the package. Open the software
directly from USB key.
User guide PhysiRun Lab - v1.1.1 Date: 06.05.2019
Copyright © 2018-2019, All Rights Reserved - Gait Up SA. CH-1015 Switzerland
®
5 to your computer with the USB cable
th
2018. If the time is not configured, your file is saved in the
EPFL Innovation Park, Bat C. CH-1015 Lausanne
Gait Up SA
www.gaitup.com
TVA CHE-145.136.760
8