Table of Contents
Advertisement
Installer and Users please note:
These instructions should be read carefully and left with the user of
the product for future reference.
Inspect the product for any signs of damage. If the product is
damaged, DO NOT use it, and contact your supplier immediately.
Do not use the appliance in locations where paint, petrol or other
•
flammable liquids are used or stored.
Do no insert any object into the appliance through the grilles. This
•
may damage the appliance or result in overheating or electric shock.
Do not use this appliance in the immediate surroundings of a bath,
•
a shower or a swimming pool.
Do not use unless correctly installed.
•
Do not cover when in use.
•
For indoor use only.
•
GENERAL SAFETY REQUIREMENTS
Domestic wiring must be tested periodically by a qualified electrician
at least once every 10 years or at every change of occupancy.
For office and retail premises, and buildings such as village halls, the
wiring must be inspected at least once every 5 years.
It is recommended that all building be fitted with smoke alarms (it is
mandatory for new buildings).
The DP10000 must be installed by a competent electrician in
accordance with the current IEE Wiring Regulations.
Mains input Remove the four cover fixing screws, and remove the
top cover. The grommets supplied may be replaced by 20 mm cable
glands if required. Ensure that the supply to which the DP10000 is
to be connected is capable of supplying sufficient current for the
load connected. If used to its full capacity, a 6 mm
its own 40 A circuit breaker will be required. The DP10000 must
not be wired to a 30 A ring main, or connected via a 13 A plug and
socket unless the output is de-rated accordingly.
IMPORTANT
BEFORE USE
PRODUCT SAFETY
INSTALLATION
Page 2
cable wired to
2
Advertisement
Table of Contents
