Berkeley Varitronics Systems WallHound-Pro User Manual page 7

seconds or 30 seconds.
Toggles between 3 different screensaver modes displayed on the
touchscreen when the unit is not being actively used: OFF, STEALTH and
CLOCK. OFF shows all RF activity measurements and no screensaver at all.
STEALTH simply shows nothing, as if the unit is turned off entirely. CLOCK shows
time, date and current temperature. The actual temperature is accurate and displayed in
either Celsius or Fahrenheit degrees. The temperature sensor is mounted in the back of
the unit shown here. Touch the BACK button to begin the screensaver of your choice
and touch anywhere on the screen again to exit screensaver mode.
Set the time and date for both the screensaver clock mode and the timestamps of every measurement.
Change the rate at which Wi-Fi, BT, BLE measurements are displayed on their respective screens by choosing
between 4 rates: always on, always off, 10 seconds and 10 minutes. These settings only affect the demodulated
measurements. For example, only the last Wi-Fi scan result will be shown when it is set to always
off. You might need to experiment with these settings depending upon environment. BVS
recommends 10 seconds for busy RF environments and 10 minutes for less busy RF environments.
Change the country you are operating WallHound-Pro within, thereby changing the cellular channels being
scanned and displayed as well as international Wi-Fi bands. Choose between UNITED STATES,
EUROPE, CANADA, AUSTRALIA, NEW ZEALAND, ISRAEL, INDIA, BRAZIL, SWEDEN,
JAPAN, CHILE, PHILIPPINES, SOUTH KOREA, GUATEMALA, COSTA RICA and
TRINIDAD. The country selected is also displayed on the MAIN MEASUREMENT screen according to its 2
letter country code in the upper right corner of the Main Measurement Screen.
6