Garmin APPROACH Z82 Quick Start Manual page 10

3 Plug the large end of the USB cable into an
external power source, such as an AC adapter
or a USB port on your computer.
4 Charge the device completely.
TIP: You can turn off the device to charge it
faster.
Stable Signal Transmission
Before connecting the charging cable to
Approach, affix the ferrite bead
roughly 2 cm from the plug
NOTE: A ferrite bead needs to be attached to the
charging cable near the USB plug. The ferrite bead
will prevent electromagnetic interference from the
cable. Do not relocate or remove the ferrite bead.
NOTE: The ferrite bead is included for certification
purposes in Taiwan and Korea only.
APPROACH Z82
①
to the cable
②
.
Attaching the Carabiner Clip
1 Position the carabiner clip in the slots on the
mounting spine of the carry case.
2 Slide the carabiner clip up until it locks in
place.
Specifications
Operating From -10º to 55ºC (from 14º
temperature range to 131ºF)
NOTE: The device protects
itself from overheating and
shuts down automatically if the
internal temperature exceeds the
operating temperature threshold.
Charging From 10º to 45ºC (from 50º to
temperature range 113ºF)
EN
9