Fein ASW14-6 PC Manual page 13

OBJ_BUCH-0000000157-002.book Page 13 Tuesday, February 17, 2015 1:44 PM
en
13
Aligning the angle head
Fig. 6
(ASW 14-6 PC, ASW 14-10 PC,
ASW 14-14 PC , ASW 14-6, ASW 14-10,
2.
1.
ASW 14-14) (figure 6).
Loosen the clamping sleeve and turn the angle
3.
head to the desired working position.
Retighten the clamping sleeve.
Angle head
Aligning the angle head
2.
Fig. 7
(ASW 14-30 PC) (figure 7).
Counter-hold the angle head and loosen the
Angle head
lock nut using two open-end wrenches; turn
the angle head to the desired working posi-
4.
tion, hold it in place and tighten the lock nut
again using the open-end wrenches.
3.
3.
1.
Changing the tool (figure 8).
Fig. 8
Push the sleeve of the tool holder toward the
front.
Insert the application tool and release the
sleeve.
Sleeve
Application tool