Table of Contents
Advertisement
Positioning the CAV-100 Multichannel Power Amplifier
For best performance, place your CAV-100 Multichannel
Power Amplifier on a solid, non-resonant surface. Do not
place the CAV-100 Multichannel Power Amplifier directly
on top of another component.
Place the CAV-100 Power Amplifier near its final set-up
position, allowing 8 inches of clearance at the rear for
tightening the speaker output connectors. For optimum
sonic performance we recommend a Classé Reference
AC cord. Please contact your dealer for more information.
The power transformer in the CAV-100 Multichannel Power
Amplifier is located at the bottom of the chassis and just
behind the front plate. Ideally a few feet should separate
this area from any components which are susceptible to
hum. These include preamplifiers, turntables, and
interconnect cables. Allow 6 inches above and on each
side of the unit to provide adequate cooling.
9
Advertisement
Table of Contents
