Advertisement
Connecting Up
The REL AirShip™ wireless is intended to be used with the Serie S Sub-Bass System. The transmitter and
receiver will require power from an AC wall plug using the power adapter cables supplied.
It is not possible to use the AirShip™ wireless connection and a direct connection simultaneously. Using
both wired and wireless connections simultaneously could result in damage and voids all warranties.
Always switch your system off before disconnecting any wires.
The transmitter can be placed near an amplifier, pre-amp or processor source. Make sure the electrical
interface is fully engaged to ensure proper performance.
There must be at least 12 inches between AirShip™ and other wireless sources.
Airship™ permits simultaneous use of our new 5.8 gigahertz connection for both HIGH-LEVEL connection
AND the .1/LFE needed for high quality theater. In this way, both 2-channel music and multi-channel theater
are supported simultaneously meaning the REL owner can use their REL without adjusting anything further
to any form of music or theater.
Our HIGH-LEVEL input is designed to accept the stereo (two-channel) signals from the speaker terminals
of your receiver, integrated amplifier or power amplifier(s). This has the advantage of ensuring that your
subwoofer receives exactly the same signal as the main speakers, which means that the character of the
bass from the main system is carried forward into our Sub-Bass System. Along with our extremely fast,
natural sounding Filter Circuits, Airship™ ensures you receive the benefits of REL's superior system integration
since RELs are known the world over for their perfect, rich integration without the ability to sonically locate
the subwoofer's origin.
For top theater performance, the .1/LFE circuit is granted its own dedicated wireless channel which allows
for the largest, most dynamic special effects in theater to be properly replicated in all their glory. Airship™
delivers 2 channels in parallel, one for music and theatre in HIGH-LEVEL (or LOW-LEVEL, increasingly needed
for active wireless speakers for example) and a second channel for .1/LFE in theater use.
6
Advertisement
