Advertisement
REL Theater Reference™ Home Cinema Applications
For home theater systems, once the standard set-up for two-channel outlined above is complete, the LFE
output from the processor or receiver should be connected to the .1/LFE input and appropriate volume
adjustments made using the .1/LFE LEVEL control. For this configuration, you must set the processor to the
"large" or "full range" setting for the left and right speakers in order for the REL to receive the bass signal
via the HIGH-LEVEL cable. In this configuration, the REL provides support for both the left and right speakers
for two-channel listening, and support for the LFE when films are playing. Most processors will allow you
to defeat the subwoofer output when listening in the two-channel mode. The effect of this set-up is one of
greatly increased dynamics in the mid-bass range, no bass bloat, and a greater degree of space and timing
from the special audio effects.
The .1/LFE input is via an XLR, or RCA jack that connects to the .1/LFE output of a home cinema
amplifier/processor.
12
Advertisement
