Table of Contents
Advertisement
Installing the SDI card
Always ask your local dealer to install
the SDI card.
Before installing the SDI card:
O Release the static carried in the body of the person
to perform the installation.
Installation can be performed more safely if an anti-
static wrist strap is worn.
Touching the card without first releasing this static
may cause malfunctioning.
O Do not allow the metal part of the card come in
contact with any other metal parts.
1
Turn the power to the camera off and remove any
cables which are connected to the power
connector or other connectors.
2
Loosen the 4 screws on the rear panel of the
camera, then remove the panel itself.
3
Loosen the 2 screws on the optional card slot
cover, then remove the cover.
4
Align the SDI card with the guides and insert it.
Ensure the card is fully inserted.
5
Firmly tighten the 2 screws to the optional card
slot.
If the screws are misplaced, use the extra screws
supplied with this product. (6 mm in length)
6
Firmly secure the rear panel with the 4 screws.
If the screws are misplaced, use the extra screws
supplied with this product. (8 mm in length)
CAUTION:
These servicing instructions are for use by
qualified service personnel only. To reduce the
risk of fire or electric shock do not perform any
servicing other than that contained in the
operating instructions unless you are qualified
to do so.
Optional card slot cover
SDI card
Screws (6 mm)
5
Rear panel
O U T
V ID E O
O TE
D
I/F R E M
N C A R
O P T IO
M E N
U
G /L IN
/A W C
IT E M
IR IS
B C
Y E S /A
A R
N O /B
IN
D C 12 V
EV F I/F
O U T
V ID E O
O TE
N C A R
D
I/F R E M
O P T IO
T
SD I OU
U
M E N
G /L IN
/A W C
IT E M
IR IS
B C
Y E S /A
A R
N O /B
IN
D C 12 V
Screws (8 mm)
Advertisement
Table of Contents
