DISASSEMBLY AND REASSEMBLY
3-18) Evapoartor Cover In Freezer
Part name
EVAPOARTOR
1. Remove the screws.
COVER IN
2. Remove the cover-evap front.
FREEZER
3-19) Evaporator In Freezer
Part name
Evaporator is located in the
bottom of freezer to produce
cold air driven across the
evaporator coils.
1. Take off the ductwork in Freezer.
2. Disconnect the wire connector
(Heater, Bimental, and Thermistor).
Evaporator In
3. Desolder the inlet and outlet tubes.
Freezer
5. Remove the evaporator.
4. Bend the suction pipe.
6. Take the same steps to seal the system
as mentioned earlier.
CAUTION
How To Do
How To Do
When diassembling, make
sure the unit is turned off
Descriptive Picture
Descriptive Picture
Accumulator
Accumulator
* Reference (How To Do #4)
34
Thermistor
Thermistor
Bimetal
Bimetal
Sheath
Sheath
Heater
Heater
suction
suction
pipe
pipe