Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for SolidRun ClearFog PRO
Summary of Contents for SolidRun ClearFog PRO
-
Page 2: Table Of Contents
(including liability to any person by reason of negligence) will be accepted by SolidRun Ltd., its subsidiaries or employees for any direct or indirect loss or damage caused by omissions from or inaccuracies in this document. SolidRun Ltd. reserves the right to change details in this publication without prior notice. -
Page 3: Overview
The SolidRun Clearfog PRO has compact dimensions and a low power consumption, utilizing an ARM Cortex A9 Single/Dual CPU. - Page 4 Link / Activity indicator 1000 vs. 10/100 indicator MicroUSB to UART Please see http://wiki.solid-run.com/doku.php?id=products:imx6:microsom:usbuart 1.3 Block Diagram SolidRun Clearfog PRO Evaluation Board block diagram is shown here. It displays all relevant interfaces of it. For further details please visit www.solid-run.com and wiki.solid-run.com: SolidRun Ltd www.solid-run.com...
-
Page 5: Main Hardware Components
2. M ARDWARE OMPONENTS This chapter shows the main hardware components and interfaces of the SolidRun Clearfog PRO Evaluation Board, including the A38x-uSoM MicroSoM. Top view of SolidRun Clearfog PRO Evaluation Board. Bottom view of SolidRun Clearfog PRO Evaluation Board. -
Page 6: Connector Layout
ANUAL 3. C ONNECTOR AYOUT SolidRun Clearfog PRO Evaluation Board has standard interfaces. The non-standard interfaces are listed here: 1. MicroBus Header 2. TDM Telephony Audio Header 3. Power over Ethernet (PoE) expansion header Please refer to the previous chapter for their specific location on the board. -
Page 7: Installation And Switching On
5.4 Micro USB connectivity (UART to micro-USB) The Clearfog PRO Evaluation Board can boot also connected to an external terminal on a serial port as a console by using a micro-USB cable and making a serial connection. This configuration is typically used by developers for debugging purposes (e.g. - Page 8 JANUARY 2017 SER S ANUAL There are port related LEDs on the Clearfog Pro Evaluation Board. These are indicating for example power on, connection and port activity. For further details, please refer to our wiki.solid-run.com pages. 5.6 Clock options For frequency configuration a dip switch is used. The default setting is the off-position for all 5 switches as in the picture here: Please refer to wiki.solid-run.com for various settings for different frequencies.
-
Page 9: Operational Data
**Safety Note: Please observe that the used RTC has a maximum temperature range of +70°C. In order to utilize the full range of the industrial temperature range, another RTC has to be used. SolidRun Ltd www.solid-run.com Page 9 of 13... -
Page 10: Mechanical Drawings And Dimensions
ECHANICAL RAWINGS AND IMENSIONS For product design purposes, this chapter provides the SolidRun Clearfog PRO Evaluation component positions on the board on both sides. A-Board Base Top, Side and Bottom View [225x100 mm] CAD files are available for download at www.solid-run.com... -
Page 11: Legal Notice And Compliances
SolidRun warrants the performance of its products according to actual specifications at the date of shipment. SolidRun reserves the right to make changes to its products and specifications or to discontinue any product, product line or service without prior notice. -
Page 12: Warranty Terms And Conditions
ARRANTY ERMS AND ONDITIONS SolidRun guarantees its hardware products against defects in workmanship and material for a period of one (1) year from the date of shipment. liability shall be, at sole discretion, to either repair or replace the defective hardware product at no charge. -
Page 13: Contact Information And Resources
JANUARY 2017 SER S ANUAL 9. C ONTACT NFORMATION AND ESOURCES SolidRun Ltd Headquarters 3 Dolev Street Floor P.O. Box 75 2495900 Migdal Tefen Israel Web page: www.solid-run.com Wiki page: wiki.solid-run.com Support: support@solid-run.com Sales: sales@solid-run.com SolidRun Ltd www.solid-run.com Page 13 of 13...
Need help?
Do you have a question about the ClearFog PRO and is the answer not in the manual?
Questions and answers