Avision AV100CS Getting Started Manual page 14

3.3.1 A Glance of the Scanner Properties Dialog Box
1
2
8
1. Tab Options
2. Image
Selection Box
3. Brightness
4. Contrast
5. Resolution
6. Invert
7. Scan Source
8. Defaults
Choice: Image, Compression, Color Dropout,
Paper, Multi-Feed Detection, Preview, Options,
Settings, Imprinter, Information.
Choose your image type and the side of
document you wish to scan. Options vary
based on type of scanner.
Adjust the brightness level from –100 to +100.
Adjust the contrast level from –100 to +100.
Determine the quality of the scanned image.
The industry standard is 200 dpi.
Reverse the color of your scanned image.
Choice: Auto Document Feeder, Flatbed,
Flatbed (Book), Automatic (varies due to
different scanner model)
Reset all values on the tabs to the factory
default settings.
3-7
Getting Started
3
4
5
6
7