Advertisement
Savant® Smart Audio WiSA™ (Wireless Speakers & Audio)
Document Number:
009-1903-00
Document Date:
December 2019
Document Supports:
da Vinci 9.2 or higher
This document will guide the user through the process of configuring Savant Smart Audio WiSA products. All of the WiSA speaker setup
is completed within the Savant Pro App. This guide assumes that all initial Savant system configuration has been completed, the system
has been deployed, and the Savant Pro App is connected to the Host via an Admin User account. Products supported by this document
include:
–
Smart Audio WiSA Soundbar 55 [HST-STUDIO55WS-SUR]
–
Smart Audio WiSA Sub [SPK-S1WSx]
–
Smart Audio WiSA Surround Speakers [SPK-SUR3WSx]
Copyright © 2019 Savant Systems, LLC
- 1 -
Setup Guide
45 Perseverance Way, Hyannis, MA 02601
Savant.com
| 508.683.2500
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Savant Smart Audio WiSA SPK-S1WS Series
Summary of Contents for Savant Smart Audio WiSA SPK-S1WS Series
- Page 1 Savant Pro App. This guide assumes that all initial Savant system configuration has been completed, the system has been deployed, and the Savant Pro App is connected to the Host via an Admin User account. Products supported by this document include: –...
- Page 2 Press and swipe finger up or down. Down Volume Control Volume control of the WiSA network is done within any of the Savant User Interfaces (UI). The entire WiSA network is controlled with the active Audio/ Video service. Savant Smart Audio WiSA Setup Guide Copyright ©...
- Page 3 2. App Setup This guide assumes that the Savant System has been deployed and all external speakers and subwoofers are powered on. This section describes the initial setup of a WiSA network. It also can be used to add or remove speakers, or check the status of speakers within the WiSA network.
- Page 4 IMPORTANT INFO! To remove or change a speaker from a configuration, follow the same process used to add speakers as shown above, de-selecting the speaker location will remove it from the configuration once saved. Savant Smart Audio WiSA Setup Guide Copyright © 2019 Savant Systems, LLC...
- Page 5 Saved but Disconnected The selected speaker is saved to this WiSA system but is disconnected. Family Room 3 Speakers Savant MAC: 02ea31000000 Locate Subwoofer Pre-assigned Sub DONE Savant Smart Audio WiSA Setup Guide Copyright © 2019 Savant Systems, LLC 009-1903-00 | 191206...
- Page 6 Appendix B: Splash Screens This Appendix details some of the splash screens that may appear during the Savant Pro App WiSA setup process to warn the user of potential problems. Active Service No Speakers Found This screen will be displayed if the user is attempting to start WiSA setup in a This screen will be displayed if the initial Discovery process fails to locate any room with a currently active audio service.
- Page 7 Speaker setup has timed out due Soundbar to inactivity. Please restart setup Cancel process. Wireless Speaker Setup CANCEL TRY AGAIN DONE Savant Smart Audio WiSA Setup Guide Copyright © 2019 Savant Systems, LLC 009-1903-00 | 191206...
- Page 8 Savant Systems, LLC. shall not be liable for any technical or editorial errors or omissions contained herein or for incidental or consequential damages resulting from the performance, furnishing, reliance on, or use of this material.
Need help?
Do you have a question about the Smart Audio WiSA SPK-S1WS Series and is the answer not in the manual?
Questions and answers