ENGINE REMOVAL AND INSTALLATION
Removal procedure
11-20
Removal: Engine and transmission
• Hook the wire rope on
Then, pull all the slack out of the slings by a crane.
CAUTION
• The slings must be strong enough to hang the engine and
transmission assembly (weighing approximately 600 kg).
• Be sure to keep the slings away from the exhaust gas recir-
culation pipes.
• Make sure that all harnesses and pipes are disconnected.
• Lift the engine and transmission assembly slowing. Take care
not to bump the assembly against the frame and cab.
CAUTION
• When lifting the engine and transmission assembly, do not
incline it larger than 40°.
and hitch the chain block to
.