Table of Contents
Advertisement
HOW TO INSTALL THE HOME STATION
How to Install the Home Station
1. Position the home station against a wall on hard level ooring
to prevent sliding during docking.
Remove objects within 1.5 to the right
and left side and within 2 to the front.
2. Plug the power cord into an outlet.
Wrap the remaining power cord around the xed hook on the back side of the
home station or along the wall surface so that the travel path of the Robot
Cleaner will not be obstructed.
3. Fix the home station against the wall so that it does not move.
Then turn on the power switch.
4. When the remote controller is not used, store it in the remote controller holder
on the home station.
Tip
• Always keep the home station plugged in when in use. If the home station is not plugged in, the Robot
Cleaner will not return to the station to charge automatically.
< Warning >
Do not operate the Robot Cleaner if the Home Station has a damaged cord or plug, if it is not working
properly, or if it has been damaged or dropped. To avoid electrical hazards, the cord must be replaced
by LG Electronics, Inc. or a qualified service person.
14
1.5
2
1.5
Fixing hook of power cord
Advertisement
Table of Contents
