Advertisement
Grounding
tO preVent eLectric SHOcK anD DeatH FrOM
incOrrect GrOunDinG Wire cOnnectiOn:
check with a qualified electrician if you are in doubt as to whether the outlet is properly
grounded. Do not modify the power cord plug provided with the tool. never remove the
grounding prong from the plug. Do not use the tool if the power cord or plug is damaged. if damaged,
have it repaired by a service facility before use. if the plug will not fit the outlet, have a proper outlet
installed by a qualified electrician.
Double insulated tools: tools with two prong plugs
Outlets for 2-prong plug
extension cords
note: Extension cords must not be used with this item's power adapter.
Symbology
Double Insulated
V
Volts
~
Alternating Current
a
Amperes
No Load Revolutions
n 0 xxxx/min.
per Minute (RPM)
Specifications
Item 58999
Tool Rating
Adapter Rating
No Load Speed
Collet Size
Maximum Accessory Diameter
For technical questions, please call 1-888-866-5797.
1. Tools marked "Double Insulated" do not
require grounding. They have a special
double insulation system which satisfies
OSHA requirements and complies with
the applicable standards of Underwriters
Laboratories, Inc., the Canadian Standard
Association, and the National Electrical Code.
2. Double insulated tools may be used in either of the
120 volt outlets shown in the preceding illustration.
(See Outlets for 2-prong plug.)
WARNING marking concerning Risk
of Eye Injury. Wear ANSI‑approved
safety goggles with side shields.
Read the manual before
set‑up and/or use.
WARNING marking
concerning Risk of Fire.
Do not cover ventilation ducts.
Keep flammable objects away.
WARNING marking concerning
Risk of Electric Shock.
Properly connect power cord
to appropriate outlet.
12VDC / 500mA
120VAC / 60Hz
‑1
n: 16000/min
1mm, 3mm, 1/8", and 3/32"
Ø1-1/4" (Ø35 m m)
Page 7
Advertisement
