Bernina Virtuosa 153 Instruction Manual & Sewing Manual page 10

Changing the needle
Changing the presser foot
Presser foot with shank
· raise the needle and
· presser foot
· turn power switch to 0
Supplementary spool pin
Vertical spool pin
· the supplementary (vertical) spool
pin is stored with the accessories
· push it from right to left in the
opening provided
· pull it to the right to remove
· essential when sewing with
more than one thread, e.g. for
double needle work
· raise the clamping lever
· remove the presser foot
Removing the needle
· raise the needle
· turn power switch to «0»
· remove the presser foot
· loosen the needle clamp screw
· pull the needle down to remove
Inserting the needle
· flat side of needle to the back
· insert the needle as far as it will go
· tighten the needle clamp
Refer to the safety instructions!
Attaching the presser foot
· guide the foot upwards
· over the cone
· press the clamping lever
· down
Setting up the machine
Refer to the safety
instructions!
9