Table of Contents
Advertisement
MANAGING ALARMS
1
To silence an alarm, hold the user card over the RFID icon. To disarm after silencing an alarm, hold the user card over the
RFID icon for 5 seconds.
CABLE REMOVAL
1
Insert a corner of the RFID card into the slot and press
down until the cable ddetaches.
REMERCHANDISING
1
From an armed state, place the
user key over the RFID icon to
disarm the system. LED will be
flashing white. Then remove the
cable.
www.mtigs.com | T:800.426.6844
CX FLEX™ SINGLE-POWER PRODUCT MANUAL
2
2
2
Insert new cable until it clicks.
click
Remove the cable.
3
Re-arm by holding user card over
RFID icon or system will auto-arm
after 1 minute.
MTI P/N 063-00308 rev 2 ©2019 MTI All Rights Reserved
4
Advertisement
Table of Contents
Need help?
Do you have a question about the CX FLEX Single-Power and is the answer not in the manual?